DIY Builds
DIY Builds
Photo: Karolina Grabowska
In most cases, we recommend cutting to the outside of the line. You can always take more wood off, but you can't get it back once you've started your cut. The saw blade should move just along the side of the line. If you cut to the pencil line, the thickness of your blade might take off more material than you expected.
Split the Wood First things first you must split the wood, Splitting the wood before seasoning increases exposed surface area which subsequently...
Read More »
In order to avoid potential buildup of mold, mildew, and rot growth, it is advised that you should leave space between a fence and a shed. This...
Read More »
When two pieces of wood are glued together using high-quality clamps, the bond between them becomes stronger than the wood itself. But before you can break out the power tools and start assembling your woodworking projects, you need to know how to measure, mark, and cut wood properly and precisely – every time. Because if even a single piece of paper can fit between two pieces of joined wood, the glue bond isn’t as strong as it could be. Besides helping achieve good bonds and even contact, taking the time to cut every piece of your project correctly will help it all come together the way you envision, with minimal time spent sanding or making corrections. It’s true that in many instances, not every cut is critical to the success of the job. But always striving to be as accurate as possible can’t hurt, and being consistent will help build lasting good habits.
Never use thin-wall EMT conduit for underground applications. Running wire through Schedule 40 PVC conduit. Here, the conduit must be at least 18...
Read More »
Always use pressure treated lumber when constructing things that will need to stand up to the elements. As for the sheds' floor deck, use ¾-in. or...
Read More »
Now that you’re ready to cut your wood, let’s review five of the main woodworking cuts and when to use them. Crosscut. A crosscut is any cut that slices across (“cross”) the grain direction of the wood. To make this cut, use a miter saw or a table saw for best results. A table saw will let you cut wider pieces of wood. Avoid using a band saw, as crosscutting wood is more strenuous on a blade and a band saw is more likely to burn the edges of the wood or result in rough cuts. Rip cut. A rip cut is a cut that follows the direction of the wood grain. Think of it as “ripping” the wood apart. This type of cut is easy to perform with most saws, and many professional woodworkers use a table saw with a rip fence for consistent, repeatable results. But use caution when you hold the wood. Never try to push a board through a table saw using just your hands; use a push stick to guide the piece forward. A good miter saw with a wide blade and a sharp edge can also be used for rip cuts. Resawing. When you resaw wood, you cut along the edges of boards to create thinner boards. This is an ideal way to turn thick pieces of wood into thinner slabs for veneering or bookmatching. A finely tuned miter saw is the best tool for this technique. Once you’ve resawed your wood, you can run your boards through a wood planer to ensure flat surfaces. Miter. A miter cut is any cut made at an angle other than 90 degrees (i.e., not a square cut). Typically this is a 45-degree cut through the wood and is used for making boxes, picture frames, and other framing structures. Unsurprisingly, a miter saw is the best tool to use when miter cutting. A bevel cut is very similar to a miter cut, except a bevel cut is used to create angled or round edges. To make bevel cuts, hold the board’s face against the fence of your miter saw. And to be safe, set the fence so that the blade tilts away from it. Curved cut. A curved cut is any cut that is intentionally not a straight cut. A band saw is perfect for creating curved cuts. Always cut to the outside of your mark line because you will have to round off your edges regardless. For thinner wood, a jigsaw can provide better results.
Shed sizes are categorized as small, medium, and large. Small sheds are under 80 square feet with 8'x8' or 10'x8' options. Medium sheds are 90 to...
Read More »
Painting the interior of a shed with white interior paint job is a good idea. It seals the wood, helps prevent mildew and insect damage, it...
Read More »
The only time it makes sense to use 2×6 lumber is if you plan to use your shed as a work or living space. 2×6 framing gives you more options for...
Read More »
On June 22, the U.S. Supreme Court handed privacy rights activists a major win by ruling it unconstitutional for police to demand guest information...
Read More »
If you are attempting to figure the carrying capacity of land for a horse, then a good rule of thumb is 1-1/2 to 2 acres of open intensely managed...
Read More »
“As sold, Tuff Shed buildings are not designed for nor intended to be used as a permanent, full-time dwelling,” a Tuff Shed website states. “Local...
Read More »
Promotion
Promotion
Promotion