Where should soffit vents be placed?

You should install your soffit vents along your home's eaves. You can install them under the roof's eaves to help air circulate through your attic space. And you should install them along the length of your eaves to ensure proper airflow.

hardieboysinc.com - Soffit Vent: What Is It and How to Install to Improve Ventilation?

Are sheds easy to break into?

Check The Door Hinges Your home shed is only as secure as the weakest link. You can have the most durable shed in the world, but it is all for...

Last updated Jan 13, 2021

Can your Neighbour paint your fence?

Your neighbour doesn't have to change a wall or fence just because you want them to, for example making it higher for privacy. You can't make...

Last updated Jun 26, 2018

Promotion

Where Should Soffit Vents Be Placed?

You should install your soffit vents along your home’s eaves. You can install them under the roof’s eaves to help air circulate through your attic space. And you should install them along the length of your eaves to ensure proper airflow. When fitting your soffit vents, you should ideally place half of your soffit vents at the lowest point of the roof, in the soffit. The other half of your soffit vents should be placed in either gable or ridge vents, higher up on top of your soffit to allow air circulation.

How To Install Soffit Vents

Now you know what soffit vents are, how they work, and the best kinds of soffit vents, you can purchase your soffit vent materials and install them. Here are our best tips for installing soffit vents. Follow this guide to install your soffit vents. You will need the following tools and equipment to install your ventilator system:

Soffit ventilation

Ventilation baffles

A ladder

A staple gun

A cordless drill

A plank of plywood

Protective equipment—hardhat, goggles, etc.

Aviation snips

A marker pen

A measuring tape

A hammer

A chisel

Make Two Parallel Lines, Cut Them, And Connect Them

To begin the installation process, mark where your soffit vents will go. To do this, you will need a marker and some measuring tape. You must draw two parallel lines along the center of your soffit. These lines should be two inches apart and span your soffit’s entire length. You will need a ladder to perform this process. Next, you should take a circular saw and cut along the two lines that you have drawn. To do this, you must bore a small hole into the soffit and measure its thickness. Then, set your circular saw to make incisions at this depth. Once you have cut your lines, you can use a chisel to connect them with a smaller line. You should do this at the end of the lines, near where the soffit ends. When these lines are connected, you can then pry the 2-inch piece of soffit from its place using a hammer claw, leaving a strip of space in your soffit.

Raise The Vent To The Soffit

For this next step, you’ll need a cordless drill. To prepare your soffit for attachment, you should drill evenly spaced holes into your soffit vent, which will allow you to attach the vent to the soffit. These holes should be around 13 inches apart. Lay the soffit vent on a piece of plywood to perform the drilling. You should climb up your ladder to the soffit with your vent. Raise the vent to the soffit, and line it up with the strip that you have cut.