DIY Builds
Photo by Yan Krukov Pexels Logo Photo: Yan Krukov

Why is it called a halfpipe?

Overview. The structure resembles a cross-section of a swimming pool, essentially two concave ramps (or quarter-pipes), topped by copings and decks, facing each other across a flat transition, also known as a tranny. Originally half-pipes were half sections of a large diameter pipe.

en.wikipedia.org - Half-pipe - Wikipedia
Can you use PVC for underground electrical conduit?
Can you use PVC for underground electrical conduit?

PVC conduit is often used in underground and wet location applications where electrical cables need to be protected. Because it's UV tested and...

Read More »
Last updated Feb 16, 2020
How big is a 1500 square-foot house?
How big is a 1500 square-foot house?

12' by 125' also equals 1,500 square feet. The typical shotgun house measures 12 feet in width. It usually contains three or four rooms, equaling...

Read More »
Last updated Jun 28, 2019

Structure used in sports

Vert ramp with vert, transition, and flat

A half-pipe is a structure used in gravity extreme sports such as snowboarding, skateboarding, skiing, freestyle BMX, skating, and scooter riding.

Overview [ edit ]

The structure resembles a cross-section of a swimming pool, essentially two concave ramps (or quarter-pipes), topped by copings and decks, facing each other across a flat transition, also known as a tranny.[1] Originally half-pipes were half sections of a large diameter pipe. Since the 1980s, half-pipes contain an extended flat bottom between the quarter-pipes. The original style half-pipes are no longer built. Flat ground provides time to regain balance after landing and more time to prepare for the next trick.

Half-pipe diagram

Half-pipe applications include leisure recreation, skills development, competitive training, amateur and professional competition, demonstrations, and as an adjunct to other types of skills training. A skilled athlete can perform in a half-pipe for an extended period of time by pumping to attain extreme speeds with relatively little effort. Large (high amplitude) half-pipes make possible many of the aerial tricks in BMX, skating and skateboarding. For winter sports such as freestyle skiing and snowboarding, a half-pipe can be dug out of the ground or snow perhaps combined with snow buildup. The plane of the transition is oriented downhill at a slight grade to allow riders to use gravity to develop speed and facilitate drainage of melt. In the absence of snow, dug out half-pipes can be used by dirt-boarders, motorcyclists, and mountain bikers. Performance in a half-pipe has been rapidly increasing over recent years. The current limit performed by a top-level athlete for a rotational trick in a half-pipe is 1440 degrees (four full 360 degree rotations). In top level competitions, rotation is generally limited to emphasize style and flow.

Origin [ edit ]

In the early 1970s, swimming pools were used by skateboarders in a manner similar to surfing ocean waves. In 1975, some teenagers from Encinitas, California, and other northern San Diego County communities began using 7.3-metre-diameter (24 ft) water pipes in the central Arizona desert associated with the Central Arizona Project, a federal public works project to divert water from the Colorado River to the city of Phoenix. Tom Stewart, one of these young California skateboarders,[2] looked for a more convenient location to have a similar skateboarding experience. Stewart consulted with his brother Mike, an architect, on how to build a ramp that resembled the Arizona pipes. With his brother's plans in hand, Tom built a wood frame half-pipe in the front yard of his house in Encinitas. In a few days, the press had gotten word about Tom's creation and contacted him directly. Tom then went on to create Rampage, Inc. and began selling blueprints for his half-pipe design.[3] About five months later, Skateboarder magazine featured both Tom Stewart and Rampage.

How high can a shed be in a garden?
How high can a shed be in a garden?

it will be more than 4m high with a pitched roof or 3m high with a flat roof. If it will be within 2m of the boundary of the house, it must be 2.5m...

Read More »
Last updated Oct 7, 2021
How big of a shed do I need for a push mower?
How big of a shed do I need for a push mower?

The right size shed for the job is a 10 foot by 16 foot option. With those dimensions, you have enough room to comfortably house a large mower and...

Read More »
Last updated May 19, 2021
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion

Design [ edit ]

Mini ramp (no vertical)

The character of a half-pipe depends on the relationship between four attributes: most importantly, the transition radius and the height, and less so, the degree of flat bottom and width. Extra width allows for longer slides and grinds. The flat bottom, while valued for recovery time, serves no purpose if it is longer than it needs to be.[4] Thus, it is the ratio between height and transition radius that determines the personality of a given ramp, because the ratio determines the angle of the lip.[5] On half-pipes which are less than vertical, the height, typically between 50% and 75% of the radius, profoundly affects the ride up to and from the lip, and the speed at which tricks must be executed. Ramps near or below 0.91 m (3 ft) of height sometimes fall below 50% of the height of their radius. Technical skaters use them for advanced flip tricks and spin maneuvers. Smaller transitions that maintain the steepness of their larger counterparts are commonly found in pools made for skating and in custom mini ramps. The difficulty of technical tricks is increased with the steepness, but the feeling of dropping in from the coping is preserved. Common mistake in the construction of ramps is constant radius in transitions: Most of the ramps are built with a quarter circle of constant radius for easy construction, but the best ramps are not constant radius but a parabola with little final vert (vertical). The parabola allows for easy big air with return still on the curve and not on the flat.

Construction of a cycloid

Mathematics [ edit ]

A cycloid profile will theoretically give the fastest half-pipe if friction is neglected. It is then called a brachistochrone curve. Such a curve in its pure form has infinitely short verts and is π times as wide as it is high.

Skateboarding, freestyle BMX, Scootering, and aggressive inline skating [ edit ]

Frame and support for skateboard, BMX, and vert skating half-pipes frequently consist of a 2×6×8" lumber (actual 38 × 140 × 184 mm) framework sheathed in plywood finished with sheets of masonite or Skatelite. Also, a metal frame finished in wood or metal is sometimes used.[citation needed] Most commercial and contest ramps are surfaced by attaching sheets of some form of masonite to a frame. Many private ramps are surfaced in the same manner but may use plywood instead of masonite as surface material. Some ramps are constructed by spot-welding sheet metal to the frame, resulting in a fastener-free surface. Recent developments in technology have produced various versions of improved masonite substances such as Skatelite, RampArmor, and HARD-Nox.[6] These ramp surfaces are far more expensive than traditional materials.

Do raccoons live under sheds?
Do raccoons live under sheds?

Though their natural habitat is wooded areas, they are very adaptable to the urban environment and will live under sheds and decks, in garages or...

Read More »
Last updated Feb 9, 2020
How do I make my wheelchair accessible in my bedroom?
How do I make my wheelchair accessible in my bedroom?

How to Make Your Bedroom More Wheelchair Accessible Doors and Doorways. ... Remove Impediments. ... Install Bed Lifts. ... Handrails and Grab Bars....

Read More »
Last updated Feb 21, 2022
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion

Channels, extensions, and roll-ins are the basic ways to customize a ramp. Sometimes a section of the platform is cut away to form a roll-in and a channel to allow skaters to commence a ride without dropping in and perform tricks over the gap. Extensions are permanent or temporary additions to the height of one section of the ramp that can make riding more challenging. Creating a spine ramp is another variation of the half-pipe. A spine ramp is basically two quarter pipes adjoined at the vertical edge.

Snow Half-pipes [ edit ]

Half-pipe in snow

Half-pipes in snow were originally done in large part by hand or with heavy machinery. Pipes were cut into snow using an apparatus similar to a grain auger. Colorado farmer Doug Waugh created the Pipe Dragon used in both the 1998 and 2002 Winter Olympics.[7] One current method of half-pipe cutting is by use of a Zaugg Pipe Monster, which uses five snow-cutting edges to create an elliptical shape that is purportedly safer and allows the rider to gain more speed.[citation needed] In winter sports, a 6.7 m (22 ft) halfpipe is called a superpipe. The tallest snow superpipe in the world is currently located near Laax, Switzerland.[8] With a height of 6.90 m (22.6 ft), this halfpipe has held the world record since the 2014/2015 season, and regularly hosts the LAAX Open. The current world record for highest jump in a half-pipe is held by freestyle skier Joffrey Pollet-Villard.[9] He set the record at the FIS Freestyle Ski and Snowboarding World Championships in 2015, when he achieved a height of 8.04 meters (26ft, 3in) above a 22-ft superpipe.

See also [ edit ]

Quarterpipe at XLETIX running race in Germany

en.wikipedia.org - Half-pipe - Wikipedia
How can I make 150k a year without a degree?
How can I make 150k a year without a degree?

Jobs that Pay 100k a Year Without a Degree Business Owner. Small business is the lifeblood of the American economy. ... Real Estate Broker. ......

Read More »
Last updated Sep 15, 2020
What is the cheapest metal that doesn't rust?
What is the cheapest metal that doesn't rust?

Aluminum Aluminum is one of the most commonly used metals on the planet, and it's arguably the most famous for not rusting. Aluminum doesn't rust,...

Read More »
Last updated Aug 20, 2019
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion
How much does it cost to charge an electric car?
How much does it cost to charge an electric car?

If electricity costs ¢10.7 per kWh and the vehicle consumes 27 kWh to travel 100 miles, the cost per mile is about $0.03. If electricity costs...

Read More »
Last updated Jul 18, 2018
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »
Promotion
What will replace Styrofoam?
What will replace Styrofoam?

Cruz Foam. Pros. Cruz Foam offers an earth-friendly plastic alternative to Styrofoam. ... PLA Lined Paper. Pros. Polylactic Acid (PLA) lined paper...

Read More »
Last updated Jul 29, 2018