Why is the inside of my shed Mouldy?

If the outside temperature drops, any moisture inside the shed will cause condensation on the inside of the shed panels, roof, floor and possibly other items stored in the shed. This condensation will cause mould and mildew to form very quickly.

shedsandthings.co.uk - Moisture and Mould Issues In My Garden Shed

Should you glue down plywood subfloor?

The answer: Glue. Although using a subfloor adhesive (or subfloor glue) is not required by code, it is a standard practice that can help prevent...

Last updated Sep 24, 2018

Do barn doors damage walls?

The normal swinging doors sometimes damage walls with their door handles and block walkways. Though barn doors need some space in the wall to open...

Last updated Oct 4, 2019

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Moisture and Mould Issues In My Garden Shed

Garden sheds can suffer from moisture and damp issues at certain times of the year. Wooden sheds are even more prone to these problems, as timber is a perishable material. Winter and Spring are the main times, when there may a high level of moisture in the air. This is caused by wet weather and damp conditions.

Effects of moisture are…

Premature rot

Mould on interior panels and roof

Warping and sagging of timber

Preventing Damp Issues

There are a few things that you can do to prevent and minimise the damage which can be caused by moisture. A major cause of rot in garden sheds is rising damp, this is caused by ground water being absorbed through the floor bearers and into the floor. To prevent this from happening it is best sorted during the initial planning stages of siting and building the shed. You will need a barrier between the ground and the floor of the shed, to stop the moisture entering. How you do this will depend on what type of base you are using on which to position the shed... Bases made using gravel allow any rain water to flow freely through it and prevent water from pooling. This reduces the chances of water being soaked up by the floor bearers. Timber bases can be used to raise the shed completely off the ground, so that it is almost impossible for water to penetrate the floor bearers. Concrete and paving slab bases need to be a level as possible to allow water to run off and prevent it from pooling. A shed that sits in puddled water will inevitably absorb water. Not only can sheds suffer from ground moisture, but also from moisture in the air. This issue is particularly prevalent in Winter. Moisture, caused by damp, wet conditions can get trapped inside sheds, especially if they are not used often. If the outside temperature drops, any moisture inside the shed will cause condensation on the inside of the shed panels, roof, floor and possibly other items stored in the shed. This condensation will cause mould and mildew to form very quickly. To combat this issue, it is advised to allow the shed to vent as often as possible throughout the winter. This will enable fresh air to circulate around the building and stop moisture from building up. To do this, you can open the windows if you have them or leave the door open from time to time. It is also a good idea to not store wet or damp items in the shed, like garden tools or bikes etc… Try to dry them off before returning them to the shed. If you do get mould forming, it is advisable to remove it as quickly as possible with an anti-mould cleaner, before it penetrates and permanently damage the timber.

Further Advice

How much weight can a 12 foot 2x6 support?

A 2×6 will hold 4 pounds per linear foot horizontally and 53 pounds per linear foot on its edge. Vertically, a 2×6 will hold between 662 and 998...

Last updated Feb 8, 2018

What is the big yellow thing in football?

Football Goal Posts The goal post is a yellow Y-shaped structure at either end of the football field, just behind the end line of the end zone....

Last updated Jan 28, 2022

Promotion

Is bubble wrap a good insulator for a shed?

The simplest and easiest way of adding shed insulation is Bubble Wrap. Bubble Wrap can be found in large quantity's at any DIY/Hardware Store and...

Last updated Nov 24, 2020

How many bags of quikrete do I need for a 10x10 slab?

How many bags of concrete do I need for a 10×10 slab at 4 inch thick. At 4 inch thick, for a 10×10 slab, you will need either seventy four 60-...

Last updated Aug 31, 2019

Promotion

Do Solicitors check planning permission?

When you sell your house Fosters Solicitors will ask you whether any Building Works, Change of Use or Installations have taken place at the...

Last updated May 31, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What should I look for when buying a shed?

5 Things to Know Before Buying a Shed Shed Covenants and Permits. Check the restrictions or covenants your neighborhood has for building sheds. ......

Last updated Dec 2, 2022