Will spray foam stop water leaks in roof?

Spray foam will stop a roof leak for as long as the building exists. This is because spray foam is a renewable roofing system. If you didn't know, spray foam would degrade when exposed to UV rays. To combat this, a silicone coating is applied over spray foam.

westroofingsystems.com - Does Spray Foam Stop Roof Leaks? - West Roofing Systems

Can you lay armoured cable on the ground?

Armoured cables and cables having an earthed metal sheath suitable for use as a protective conductor may be buried directly in the ground without...

Last updated Dec 5, 2021

What is the drop on a lean-to?

Slope of Lean to Roof Lean to roofs are usually given a pitch of 3:12 to 4:12. Practically this mean for every horizontal distance of 12″ a drop of...

Last updated Mar 4, 2022

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

Does Spray Foam Stop Roof Leaks?

So, you’re wondering if spray foam can stop a roof from leaking?

The answer is yes.

But you probably have other questions, such as:

What is spray foam roofing?

Do you install spray foam over the area that’s leaking and that’s it?

Do you need to install spray foam over an entire roof, or can you target one area?

How long will spray foam stop a leak?

How much will it cost to stop a leak with spray foam?

Explain an example situation where spray foam stopped a roof leak.

How does the process get started?

Does West Roofing provide free roof inspections?

We will answer all of these questions below.

Just so you know, West Roofing Systems has been stopping leaks on commercial buildings since 1979. We specialize in spray foam roofing for roof repairs, roof restorations, and a complete roof replacement if it makes sense long-term for a building owner.

The recommended service depends on the current condition of the existing roof.

Now let’s dive right into spray foam and roof leaks.

What is spray foam roofing?

Spray Polyurethane Foam Roofing is a material that’s sprayed as a liquid and expands into a foam, creating a solid monolithic layer of fully adhered insulation across an existing roof. The usual application of spray foam is to repair and rejuvenate an existing roof by removing the saturated areas (if any), replacing them with like materials, and then spraying foam over top of the entire roof.

Do you install spray foam over the area that’s leaking and that’s it?

For spray foam to cure correctly and perform at its maximum, spray foam needs to be applied to a dry, clean, and sound roof. Dry means that the wet insulation will need to be removed and replaced with similar material. For example, if you have a TPO roof with polyiso underneath, the wet polyiso will be removed and replaced with new polyiso. New TPO would then replace the old TPO. If you don’t remove wet insulation, water will freeze and contract in the winter, which can cause cracks. This isn’t just with spray foam; freezing and cracking can happen with any roofing system. The cracking opens the roof membrane, which allows for more water to enter the roof system in the future. If you have water in your insulation during the Summer, the insulation will hold that water (it will not evaporate), which can begin to rot out your wood or metal deck. Spray foam needs to be applied to a clean roof. This is usually done with power washing, high-pressure air, or even with a coverboard over an existing roof system. Spray foam also needs to be applied to a sound roof, meaning the existing roof needs to fully adhere to the insulation below. In most cases, a cover board will be installed over your existing roof to give spray foam a solid structure to bond with. Once the existing roof is dry, clean, and sound, spray foam can be applied.

Does spray foam need to be installed over the entire roof? Or can you target one area?

With spray foam being applied as a liquid, it can be applied in any thickness based on your situation. Therefore, spray foam can be installed to target just one area.

Should I update my bathroom before selling?

Myth No. 1: I need to redo my kitchen and bathroom before selling. Truth: While kitchens and bathrooms can increase the value of a home, you won't...

Last updated Mar 20, 2018

How long will a cedar shed last?

A wooden shed should last 15 or more years, but depending on your climate and the environment, certain types of wood won't hold up as well as...

Last updated Jun 15, 2018

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

Many property owners choose this option because it costs less than replacing the entire roof. However, spot repairs sometimes require water stops to ensure no water migrates into the spot repair from surrounding roof sections. Spot repairs cost more per square foot than spray foam over an entire roofing surface. This is because it takes time to get to the job site, time to set up, etc. When applied to an entire roof, spray foam can cost between $8 and $12 per square foot. Spot repairs could cost more per square foot.

How long will the spray foam stop the leak?

Spray foam will stop a roof leak for as long as the building exists. This is because spray foam is a renewable roofing system. If you didn’t know, spray foam would degrade when exposed to UV rays. To combat this, a silicone coating is applied over spray foam. For a 10-year warranty, 20 mils of coating will be applied over the foam. For a 15-year warranty, 25 mils of coating will be applied over the foam. For a 20-year warranty, 30 mils of coating will be applied over the foam. Say you get a 10-year warranty. After 10 years, the coating may have worn down from 20 mils to 7-8 mils. The coating wears away naturally due to foot traffic and weather. After 10 years, a contractor can renew the warranty by cleaning the area and installing the coating back to the original thickness. For the example above, after 10 years, the coating that was 7-8 mils thick will be brought back to 20 mils. Then a new 10-year warranty can be granted.

The process goes on and on and on.

There are plenty of roofs that we’ve recoated 3-4 times that have lasted 30+ years. They still have the original spray foam that was installed 30+ years ago!

How much will it cost to stop a leak with spray foam?

The cost to install a roof leak with spray foam can be anywhere from $4 per square foot, all the way to $10 per square foot. What makes the cost go up or down depends on several factors, such as:

How easy is it to access your roof?

How big of an area will the spray foam be applied to?

How much of the existing insulation will need to be removed and replaced?

How long of a warranty would you like?

It all depends on the existing condition of the roof and the scope of work that needs to be done.

Explain an example situation where spray foam stopped a roof leak

Since 1979, hundreds and hundreds of roofs have been cured of leaking and are now watertight after a spray foam installation.

A great example is Master Bolt & Manufacturing in Elyria, OH.

Master bolt is a 70,000 sq. ft. facility that had some leaking areas. Unable to afford a complete roof replacement, they looked at doing some roof repairs. West Roofing Systems came to the building and came up with a way to get the leaking to stop, and for the roof repair to be as cost-effective as possible.

Does spray foam act as a vapor barrier?

Spray Foam Insulation Already Acts as a Powerful Vapor Barrier. Among the many benefits of spray foam insulation is that it not only acts as a...

Last updated Feb 18, 2020

How do you damp proof a wooden shed floor?

Here are 7 ways to damp proof your shed: Make sure the structure is fit for purpose. ... Check your roof. ... Treat the building. ... Insulate your...

Last updated May 19, 2022

Promotion

Being cost-conscious, pulling core samples throughout the entire roof was recommended. If the core sample was wet, then that area needed to be replaced and repaired. If the core sample is dry, the area can be left alone. After cores were pulled, about 30,000 sq. ft. in four different sections were identified as being wet. Spray foam was applied to only those areas while the rest of the roof was left alone. This allowed Masterbolt to get their roof watertight and leak-free with the lowest amount of cost.

How does the process start?

The first step is to contact a commercial roofing contractor. They will have a discovery call with you to learn about what’s going on with your roof and what you would like done.

A roofing contractor will ask you some questions, such as:

How old is your roof?

What kind of roofing system is currently installed?

Where is the leaking happening inside of the building?

Then the roofing contractor will look up your address online, usually using Google Earth, to get an aerial view of your roof. Here they can tell where the penetrations are located, where drains are located, and many other details about your roof. Once the discovery call is completed, you’ll set up a time to meet each other at your facility, where the roof inspection will take place.

Does West Roofing provide free roof inspections?

Yes, West Roofing Systems does provide free inspections. All you have to do is fill out a request a quote form, we’ll give you a call, and then we’ll meet you at your facility!

Here’s a video of what happens during a roof inspection:

Spray foam roofing and leaks

One of the best qualities of spray foam is that it’s fluid-applied, which closes any tiny holes and cracks that allow water into your roofing system, and eventually into your building. Another positive is that spray foam can be applied to almost any existing substrate.

Now that you know spray foam is great against leaks, can be used as a repair option instead of paying for a complete roof tear-off, and can last as long as the building does, what other questions do you have?

For some building owners, they want to know more information about spray foam, such as: You can get the answer to all these questions in The Ultimate Guide to Spray Foam Roofing. West Roofing Systems knows that roof leaks are expensive, unexpected, can cause a safety hazard, can damage assets, and/or cause business interruption.